Category Archives: Autos

Garage time

image

Here are the chunks of the piston that came out of the oil pan. One is very close to round. Odd.

image

Poor man’s parts washer.

image

I’m going to redo most of this wiring harness and eliminate a fair amount as well. I get to remove the voltage regulator, which is about 7 feet of excess wiring. I also plan to clean and paint the engine bay. The engine harness will need redone with the new intake setup. I was planning on itbs, but now I’m thinking, keep it turbo friendly. And work more on injector placement/angle.

image

The headlights and grill will get some attention this time around as well.

The arrows engine is stripped

image

image

image

image

What a mess. It looks like the aluminum from the piston added/removed (depending on how you look at it) about .1mm to the bore. So it’s actually smaller than it should be. The crank looks great though. That’s a relief.
I’m taking the block to shaker racing to have it cleaned and bored. I’ll probably have the rising assembly balanced as well. I will have the cast pistons ceramic topped by FFWD connection.

The arrow

image

I forgot how complicated pulling this motor is. I have to take my headlights out. Well, maybe not them, but almost.

image

image

image

image

image

image

So the piston has a hole melted in it from excessive carbon build up. A never ending flame front burned a hole in it.
The head gasket was about to go anyways on number four. The spark plug was melted, and that jet valve shroud got melted as well.
I have an m28 njv head waiting.